How to configure the Coban Coban GPS301 device via SMS
This guide shows how to connect the Coban Coban GPS301 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.
SMS Commands
1. Start device configuration
To begin using the Coban GPS301 tracker, it is necessary to start the device configuration. This is done by sending a specific command that activates the initial settings.
begin123456
2. Set time zone
After starting the configuration, the next step is to adjust the time zone of the tracker. This ensures that the location information is accurate in relation to the local time.
time zone123456 0
3. Configure carrier APN
Configuring the APN is crucial, as each carrier has different information. Make sure to enter the correct data so that the tracker functions properly.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
Check the APN information with your service provider.
4. Set DNS and Port
In this step, you must enter the addresses of the DNS servers and the necessary ports to ensure a stable connection.
Fill in the data as requested.
5. Activate Vibration Alarm
The vibration alarm helps detect suspicious movements. Activate it to ensure that you will be notified in case of any unexpected activity.
shock123456
6. Activate Tracking
To start monitoring the location of the device, it is necessary to activate the tracking function. This will allow you to follow the tracker in real time.
tracker123456
7. Activate GPRS transmission
GPRS transmission must be activated for location data to be sent correctly. This configuration is essential for the functioning of the tracker.
gprs123456
8. Set transmission time
You can adjust the time interval between data transmissions. A time of 60 seconds is recommended while the tracker is in motion.
upload123456 060
9. Sleep Mode by Sensor
The tracker enters power-saving mode after 5 minutes of inactivity. It will be activated again upon detecting any movement or vibration.
sleep123456 shock
Can be activated by movement, SMS, or call.
Special commands
Special Commands
Here are some additional commands that may be useful for managing your tracker.
G123456#
where
gprs123456 0
sensitivity123456 +
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment