How to configure the Coban A306 device via SMS

This guide shows how to connect the Coban A306 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Device Configuration Start

To start using the tracker, it is necessary to begin the equipment configuration. This ensures that all functions operate correctly.

begin123456

2. Time Zone Configuration

Adjust the tracker's time zone to ensure that location data is correct. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Carrier APN Configuration

It is essential to configure your service provider's APN. APN, username, and password information may vary depending on the carrier used. Make sure to enter the correct data to ensure connectivity.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

Set the necessary DNS servers for the tracker. This configuration is essential to ensure correct communication of the device with the network.

Server 01, Server 02, Server 03 should be filled in as needed.

5. Vibration Alarm Activation

Activate the vibration alarm so that the tracker can detect movements and alert you in case of suspicious activities.

shock123456

6. Enable Tracking

Enable the device's tracking function so you can monitor the location in real time.

tracker123456

7. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send location and status information.

gprs123456

8. Set Transmission Time

Adjust the time interval for data transmission. The default is 60 seconds while the equipment is in motion.

upload123456 060

The time can be adjusted as needed.

9. Sleep Mode by Sensor

The tracker enters sleep mode after 5 minutes of inactivity. Any movement or vibration will reactivate it, providing battery savings.

sleep123456 shock

The device can be awakened by movement, SMS, or call.

Special commands

Special Commands

These additional commands allow extra functionalities for the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456