How to configure the CCTR CCTR-810 device via SMS

This guide shows how to connect the CCTR CCTR-810 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Restore Factory Settings

To return the device to its original factory state, use the appropriate command. This ensures that all custom settings are removed.

FACTORY*123456

2. Time Zone Configuration

Adjust the tracker’s time zone to ensure that recorded times are accurate. This command is essential for operations in different regions.

TIMEZONE*123456*0

3. Configure Carrier APN

APN settings must be adjusted according to the carrier of the SIM card used. It is crucial to enter the correct information to ensure the tracker’s connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember that APN information varies according to the chip supplier and carrier.

4. Set DNS and Port

Define the DNS servers and communication port to ensure the tracker connects correctly to the monitoring platform.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

Choose between the available tracking modes. The default mode keeps the device always active, while the shock control mode activates and deactivates the tracker according to movement.

MODE*123456*1

MODE*123456*2

Mode 1 is the default, while mode 2 saves battery by turning off the tracker when not in motion.

6. Set Upload Interval

Adjust the time in seconds for the data upload interval. The minimum interval is 30 seconds and the maximum is 999 seconds.

INTERVAL*123456*60

The factory default is 30 seconds.

Special commands

Special Commands

Use special commands to perform additional functions and maintain control of the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456