How to configure the CCTR CCTR-803 device via SMS

This guide shows how to connect the CCTR CCTR-803 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Factory Reset

To restore the tracker to factory settings, use the appropriate command. This is useful for troubleshooting or resetting the device to its original settings.

FACTORY*123456

2. Time Zone Configuration

Adjust the device's time zone to ensure that tracking data is accurate. The command should be sent with the desired time zone value.

TIMEZONE*123456*0

3. APN Configuration

APN configuration is essential for the device's communication with the network. Make sure to enter the correct information according to the carrier used. Each carrier may have specific values for APN, username, and password.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember that APN information may vary depending on the carrier.

4. DNS and Port Configuration

It is necessary to configure the DNS servers and port to ensure that the tracker connects correctly to the network. This data is crucial for tracking functionality.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode Configuration

Choose the tracking mode that best suits your needs. Mode 1 is the default and keeps the device always active, while Mode 2 activates the tracker only when in motion, saving battery.

MODE*123456*1

MODE*123456*2

In Mode 2, the tracker enters standby mode after 5 minutes of inactivity.

6. Upload Interval Setting

The upload interval determines how often the tracker sends data. The time can be adjusted between 30 and 999 seconds, with 30 being the factory default.

INTERVAL*123456*60

Special commands

Special Commands

These additional commands allow you to perform various useful functions on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456

Use these commands to check settings, restart the device, and keep the connection active.