How to configure the CCTR CCTR-802 device via SMS

This guide shows how to connect the CCTR CCTR-802 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Restore Factory Settings

To return the device to factory settings, send the corresponding command. This is useful when you want to reset all settings to the original defaults.

FACTORY*123456

2. Set Time Zone

Adjust the device's time zone by sending the appropriate command. This is essential to ensure that location data is correct relative to local time.

TIMEZONE*123456*0

3. Configure Carrier APN

It is crucial to update the APN information, including username and password, according to your carrier's specifications. This information varies depending on the chip supplier and the carrier used.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to enter the correct information to avoid connectivity issues.

4. Set DNS and Port

Define the DNS servers and the port that the device should use for communication. This will ensure that the tracker connects correctly to the server.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

Choose between the available tracking modes. Mode 1 is the default and keeps the device always active, while Mode 2 activates the tracker only when motion is detected.

MODE*123456*1

MODE*123456*2

Consider battery consumption when choosing the tracking mode.

6. Set Upload Interval

Adjust the upload interval time in seconds. The interval can vary from 30 to 999 seconds, with 30 being the factory default.

INTERVAL*123456*60

Choose an interval that balances data updates and battery life.

Special commands

Special Commands

These commands provide additional functionalities to manage and query the device's settings.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

Use these commands to check settings and keep the tracker operational.