How to configure the CCTR CCTR-801 device via SMS

This guide shows how to connect the CCTR CCTR-801 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Restore Factory Settings

To return the device to its original settings, use the appropriate command. This is useful for troubleshooting or resetting the tracker for new use.

FACTORY*123456

2. Set Time Zone

Adjust the device's time zone to ensure that tracking data is correct in relation to your location. The adjustment is made through a specific command.

TIMEZONE*123456*0

3. Configure Carrier APN

It is essential that the APN, username, and password settings are correctly adjusted, as they vary by carrier. Ensure you use the correct information to guarantee connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to replace the APN, username, and password values according to the carrier used.

4. Set DNS and Port

To ensure that the tracker connects correctly to the network, it is necessary to configure the DNS servers and the port. Use the provided commands for this configuration.

IP*123456*central.trackar.com.br,5040

5. Select Tracking Mode

There are two tracking modes available. Mode 1 operates continuously, while Mode 2 activates the tracker only when in motion, saving battery. Choose the mode that best suits your needs.

MODE*123456*1

MODE*123456*2

Mode 2 may be more energy-efficient.

6. Set Upload Interval

The upload interval can be adjusted as needed, ranging from 30 to 999 seconds. A shorter interval provides more frequent updates, while a longer one saves battery.

INTERVAL*123456*60

Special commands

7. Special Commands

Here are some special commands that can be used to manage and check the operation of the tracker. These commands help keep the device running and troubleshoot issues.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456