How to configure the CCTR CCTR-800 device via SMS

This guide shows how to connect the CCTR CCTR-800 tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Restore Factory Settings

To return the device to its original settings, use the appropriate command. This is useful for troubleshooting or resetting the device for new use.

FACTORY*123456

2. Set Time Zone

Adjust the tracker’s time zone to ensure that location information is accurate. Use the indicated command to set the desired time zone.

TIMEZONE*123456*0

3. Configure Carrier APN

It is essential to correctly configure the APN, username, and password, as this information varies depending on the chip provider and carrier. Ensure that the data is correct for effective connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to enter the exact data from your carrier.

4. Set DNS and Port

Set the DNS servers and port to ensure that the tracker can communicate correctly with the tracking server.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

Choose between the available tracking modes. Mode 1 is the default, while Mode 2 offers more dynamic control, activating the tracker only when in motion.

MODE*123456*1

MODE*123456*2

Mode 2 can save battery but limits the device's responsiveness.

6. Set Upload Interval

Adjust the time interval for data uploads. The interval can be set between 30 and 999 seconds, depending on monitoring needs.

INTERVAL*123456*60

The default interval is 30 seconds.

Special commands

Special Commands

Use the following commands to perform specific functions on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456

These commands offer a variety of functions, from checking settings to restarting the device.