How to configure the CCTR CCTR-700 device via SMS

This guide shows how to connect the CCTR CCTR-700 tracker to the platform using SMS commands. Send each command from the chip installed in the device, in the order indicated below.

SMS Commands

1. Restore Factory Settings

To restore the tracker to its original state, you must send the appropriate command. This is useful if you want to reset all custom settings.

FACTORY*123456

2. Set Time Zone

The tracker needs to know the correct time zone to log data accurately. The command must include the desired time zone.

TIMEZONE*123456*0

3. Carrier APN Configuration

APN settings are essential for the tracker to connect to the carrier's network. APN information, username, and password must be adjusted according to the carrier used.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to update the APN information according to the carrier of the chip used.

4. Configure DNS and Port

To ensure that the tracker connects correctly, it is necessary to configure the appropriate DNS servers and ports. This is crucial for device communication.

IP*123456*central.trackar.com.br,5040

5. Select Tracking Mode

The tracker can operate in different modes. Mode 1 keeps the device active continuously, while Mode 2 activates the tracker only when moving, saving energy.

MODE*123456*1

MODE*123456*2

Choose the mode that best suits your tracking needs.

6. Set Upload Interval

The upload interval can be adjusted to control how frequently the tracker sends data. The minimum is 30 seconds and the maximum is 999 seconds.

INTERVAL*123456*60

Special commands

7. Special Commands

There are special commands that allow you to manage and check various settings of the tracker. Use them as needed to keep the tracker operating optimally.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

These commands provide additional functionalities to manage the tracker efficiently.