How to configure the CCTR CCTR-622G device via SMS

This guide shows how to connect the CCTR CCTR-622G tracker to the platform using SMS commands. Send each command from the SIM card installed in the device, in the order indicated below.

SMS Commands

1. Restore factory settings

To restore the device to factory settings, use the indicated command. This is essential if you need to reconfigure or troubleshoot the tracker.

FACTORY*123456

2. Set time zone

Adjusting the time zone is crucial to ensure that location information is accurate. Use the corresponding command to set the desired time zone.

TIMEZONE*123456*0

3. Carrier APN configuration

Correct APN configuration, along with the username and password, is crucial for the tracker to function. The information varies by carrier, so make sure to enter the correct data.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember to check if the APN is correct for the chip used.

4. Set DNS and Port

Define the DNS servers and port to ensure that the tracker connects correctly to the network. It is important that the addresses are correct to avoid communication issues.

IP*123456*central.trackar.com.br,5013

5. Select tracking mode

Choose between different tracking modes according to your needs. The standard mode allows continuous operation, while the shock control mode saves battery.

MODE*123456*1

MODE*123456*2

Mode 2 turns off the tracker after 5 minutes of inactivity.

6. Set upload interval

Adjust the upload time in seconds, with a minimum of 30 and a maximum of 999. The factory default is 30 seconds.

INTERVAL*123456*60

Special commands

7. Special commands

Use the special commands below to access additional settings and perform specific operations on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456